What is inside the kit

Nine simple parts and one testing tool. Some of them are already at home.

Stage 1

5-gallon water jug

Holds the filter layers. We reuse an old empty jug.

0 SAR, reused

Stage 1

Clean cloth

Stops big pieces and keeps the layers in place. Cut from a clean old cotton shirt.

0 SAR, from home

Stage 1

Fine sand

Catches the smallest dirt. About 10 cm deep.

5 SAR

Stage 1

Activated charcoal

Takes away color, smell and taste. About 8 cm deep.

32 SAR

Stage 1

Coarse sand

Catches bigger dirt. About 6 cm deep.

5 SAR

Stage 1

Gravel

Lets water drain and stops the sand from escaping.

5 SAR

Stage 2

Black tray

Holds the salty water. Black heats up fast in the sun.

10 SAR

Stage 2

Clear cover

Traps the vapor and turns it into drops. A clear plastic sheet, set on a slope.

8 SAR

Stage 2

Clean cup

Collects the fresh water that slides off the cover.

0 SAR, from home

Testing

TDS meter

Measures the dissolved salt in the water. A testing tool, not part of the kit.

30 to 45 SAR

Estimated cost to make one kit

65 SAR

The kit is cheap because the jug, cloth and cup are reused from home. Prices are estimates.

Our prototype plan

Labeled plan of the prototype: the gallon filter with its layers, and the solar still with a black tray under a sloped clear cover

This is the plan we build from. The photo of our real model goes here when it is ready.

Build it in six steps

1

Prepare the jug

An adult cuts the bottom off the jug. Turn it upside down.

2

Wash the materials

Rinse the sand, gravel and charcoal until the water runs clear.

3

Stack the layers

Cloth at the neck, then gravel, coarse sand, charcoal, fine sand, and cloth on top.

4

Set up the still

Put the black tray in the sun with the clear cover on a slope above it and a cup at the low edge.

5

Run the water

Pour cloudy water through the filter, then move it to the tray and wait.

6

Measure

Use the TDS meter before, after the filter, and after the still.

Using and caring for the kit

Wash the top cloth when it gets dirty. Change the charcoal every few months. Wipe the salt out of the tray.

Questions people ask us

How long do the parts last?

The jug, tray and cover last a long time. The cloth is washed often, the sand is washed when the water slows down, and the charcoal is changed every few months.

Why is it so cheap?

The jug, the cloth and the cup are reused from home. The only part that costs much is the activated charcoal.

Ready for your kit?

Find us at the KFS Market, Class 5 White. One full kit is 85 SAR.

Order a kit